AT-VM95SP/H Headshell & MM Cartridge Combo Kit

The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell. Features Conical Stylus Aluminum Cantilever Dual Moving Magnet Design Durable Low-Resonance Housing Pre-Mounted on AT-HS6BK Headshell VM95 Series This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records it is nevertheless a stereo cartridge allowing users to choose between the left and right channels which can be especially helpful in archiving applications to minimize noise and distortion. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. Whats in the Box AT-VM95SP/H Headshell MM Cartridge Combo Kit Installation Hardware Specifications Frequency Response: 20-20000 Hz Vertical Tracking Angle: 23 Vertical Tracking Force: 4.5-5.5 g (5.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47000 ohms Coil Impedance: 3.3 k ohms (1 kHz) DC Resistance: 485 ohms Coil Inductance: 550 mH (1 kHz) Output Voltage: 2.7 mV (1 kHz 5 cm/sec.) Output Channel Balance: 1.5 dB (1 kHz) Stylus Shape: 3.0 mil conical Cantilever: Aluminum pipe Static Compliance: 12 x 10 6 cm / dyne Dynamic Compliance: 2 x 10 6 cm / dyne (100 Hz) Mounting: Half-inch Dimensions (Cartridge Headshell): 0.83" 0.84" 2.46" Model: AT-VM95SP/H Mounting Feature: Half-inch mount Recommended Load Capacitance: 100 to 200 pF Replacement Stylus: AT-VMN95SP Stylus Size: 3 mil Type: VM Stereo Dual Magnet Weight (Cartridge Headshell): 15.5 g (0.55 oz) Wire Used for Coil: T.P. Copper