AT-VM95SH Dual Moving Magnet Turntable Cartridge

This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. Features VM95 Series dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus Aluminum cantilever Durable low-resonance polymer housing Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws no nuts required Compatible with any AT-VMN95 replacement stylus What's in the Box AT-VM95SH Dual Moving Magnet Cartridge Specifications Frequency response: 20 - 25000Hz Channel separation: 23dB at 1kHz Vertical tracking force: 1.8 - 2.2g (2.0g standard) Stylus construction: Nude square shank Recommended load impedance: 47000 ohms Output: 3.5mV (1kHz 5cm/sec) Channel balance: 1.5dB (1kHz) Stylus shape: 2.7 x 0.26 mil Shibata Cantilever: Aluminum pipe Mount: Half-inch Replacement stylus: AT-VMN95SH Coil impedance: 3.3k ohms (1kHz) DC resistance: 485 ohms Load capacitance: 100 to 200pF Coil inductance: 55o mH (1kHz) Vertical tracking angle: 23 Dimensions (H x W x D): 0.68" x 0.74" x 1.2" Weight: 0.22 ounces WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.